Niet alleen een oplossing maar ook een verbetering

VOOR FIETSER EN VERVOERMIDDEL.

Bike friendly

Independent user research, conducted by Hogeschool Arnhem Nijmegen, shows that more than 60% of parked bicycles are not placed in the designated bicycle parking facility.

Main bicycle-related reasons for not using are:
Not fitting the bike due to:

1 – tire thickness
2 – accessories
3 – bicycle crate
4 – handlebar width
5 – front fork luggage carrier

Risk of damage to:

6 – wheel
7 – frame
8 – front fork (suspension)
9 – cabling
10 – brake disc

The patented AXLE hub support supports the bicycle on the axle and is suitable for tires up to 60 mm thick. This innovative way of engaging puts an end to the ‘Velgenkiller’ phenomenon and prevents any contact with bicycle frame, accessories and vulnerable parts.

All our parking solutions have a center-to-centre size of 500 mm as standard, so that any type of bicycle can be placed at any desired location.

1
2
3
4
5
6
7
8
9
10
1

Tire thickness

2

Accessories

3

Bicycle crate

4

Handlebar width

5

Front fork luggage carrier

6

Wheel/Rim

7

Frame

8

Front fork (suspension)

9

Cabling

10

Brake disc

User friendly

Independent user research, conducted by Hogeschool Arnhem Nijmegen, shows that more than 60% of parked bicycles are not placed in the designated bicycle parking facility.

Main usage-related reasons for not using are:

– Lack of attachment facility;
– Insufficient space for the bicycle;
– Difficult to use;

The patented ROSE flexible attachment device prevents contact with the bicycle and provides a secure attachment to both frame and rear wheel.

All our parking solutions have a center-to-centre size of 500 mm and a minimum lifting height as standard, so that any type of bicycle can easily be placed anywhere.

Service friendly

Most traditional bicycle sheds are fully welded and placed in the ground with footings. Simple repair or replacement is therefore virtually impossible. Damaged and unusable units therefore remain part of the streetscape for years. Moving or expanding is also expensive.

All our bicycle parking solutions are fully modular and consist of a limited number of interchangeable parts.

Main benefits are:

– Quick Placement
– Expandable
– Part level repairable
– Movable (pop-up)

Environmentally friendly

Placing it on location requires expensive groundwork and paving with polluting machines, nuisance for the environment and expensive removal of ‘contaminated’ soil. Installation costs often exceed the purchase costs.

All our parking solutions may be available in 100% circular Corten steel. Products are transported very compactly in parts using light transport and then assembled on site.

Our parking solutions are preferably placed at ground level using base plates or traverses. These can be anchored to the pavement if desired. Result: considerably lower installation costs and an enormous reduction in nuisance and pollution.

In the case of traditional installation, the parking facilities are bolted to the footings after completion of the paving and groundwork. Fast replacement/repair is therefore always possible.

Main benefits are:

– Durable design
– No heavy equipment
– Less nuisance

SUSTAINABLE THINKING AND DOING!

.

BY PURCHASING FUNCTIONAL PRODUCTS